STATIC LEARN / TEACHER GUIDE & KEY
Use a simple circuit model
Grade 11 · Science · Quick adventure
Learning goal: Apply V = IR while distinguishing a model from a safe physical procedure.
Prepare & include
Materials: Paper circuit diagram; Calculator; no mains, batteries or physical wiring required
Support: Use a formula-and-units organizer.
Stretch: Explain the modeled current change when resistance doubles at fixed voltage.
Five-day teaching sequence
- Day 1: An idealized circuit model gives voltage and resistance. What prediction can V = IR support, and what does the equation omit?
- Day 2: In the ideal model, what current corresponds to nine volts across three ohms?
- Day 3: Solve two ideal V = IR cases and explain an assumption or missing real-component limit.
- Day 4: Create a table of voltage and current values for one modeled resistance using paper or a simulator.
- Day 5: Revisit the lesson with a fresh example. Use the exit question and ask the learner to show, point, draw, type or explain their reasoning.
Worked reasoning
Use a paper-only ideal model with twelve volts across a six-ohm resistor. Rearrange V = IR to I = V/R. Calculate two amperes. Keep volts, ohms and amperes distinct and identify the voltage as across the stated resistor. Explain that real components can warm, have ratings or behave nonlinearly. A numerical model is not permission to build or connect a real circuit.
Notice: The learner multiplies voltage by resistance or treats the answer as a safe construction instruction.
Respond: Check the rearrangement and units, then keep practical electrical work outside this paper activity.
Practice key
1. B — 2 A. I = V/R = 10/5 = 2 A.
2. B — It doubles. I = V/R is proportional to voltage when R is constant.
Exit-check key
1. B — It decreases from 2 A to 1 A.. Using I = V/R, ten divided by five is two and ten divided by ten is one.
2. B — 4 V. 0.5 × 8 = 4 volts.
Evidence to look for
Correct rearrangement Consistent units A clear model-versus-procedure distinction