STATIC LEARN / STUDENT LEARNING SHEET
Use a simple circuit model
Grade 11 · Science · Quick adventure
Learning goal: Apply V = IR while distinguishing a model from a safe physical procedure.
The idea
For an ohmic resistor under the modeled conditions, voltage V equals current I times resistance R. Units are volts, amperes, and ohms. This relationship does not describe every component under every condition. Real circuits involve ratings, heating, and hazards. Use only paper calculations or a supervised simulator for this lesson.
A worked example
Use a paper-only ideal model with twelve volts across a six-ohm resistor. Rearrange V = IR to I = V/R. Calculate two amperes. Keep volts, ohms and amperes distinct and identify the voltage as across the stated resistor. Explain that real components can warm, have ratings or behave nonlinearly. A numerical model is not permission to build or connect a real circuit.
Show the idea in your own way
Create a table of voltage and current values for one modeled resistance using paper or a simulator.
Practice & explain
1. A modeled resistor has 10 V across 5 Ω. What is the current?
- 50 A
- 2 A
- 0.5 A
2. If resistance stays constant, what happens to modeled current when voltage doubles?
- It always halves
- It doubles
- It becomes zero
A fresh exit check
1. At a fixed 10 V in the ideal model, resistance changes from 5 Ω to 10 Ω. What happens to current?
- It doubles from 2 A to 4 A.
- It decreases from 2 A to 1 A.
- It stays 2 A.
2. A modeled circuit has I = 0.5 A and R = 8 Ω. What voltage does V = IR predict?
- 8.5 V
- 4 V
- 16 V