The distribution of Earth’s water
Start with a question about the stated system, then distinguish a measurement or observation from an explanation. Most Earth water is salty, and much fresh water is frozen or underground, limiting readily accessible supplies. Label salt water, frozen fresh water, groundwater, and surface fresh water separately. Record the evidence beside your claim so another learner can trace the connection. Compare a second possibility before deciding. State a limit: a small record, one perspective, or a simplified model rarely establishes every possible case.
A worked example
Worked investigation: A model shows a small fraction of all water as accessible fresh surface water. A supported response is: Total water abundance does not mean all water is readily usable fresh water.. Reasoning: Most Earth water is salty, and much fresh water is frozen or underground, limiting readily accessible supplies. This conclusion applies to the supplied situation; it does not establish every possible case. Weekly observation or model protocol: Draw a sloping surface with a soil patch, a stream channel, a low collection area, and arrows for rainfall. Trace ten drawn water tokens down the slope, recording which carry a sediment mark and where the mark settles. Repeat after adding a drawn barrier, keeping the starting slope and token count constant. Distinguish water movement, sediment transport, and settling. Then add an evaporation arrow to a separate atmosphere box and explain the energy requirement; the tokens are bookkeeping marks, not literal water molecules or a prediction of real flood quantities.
- Build an investigation page for the distribution of earth’s water. Read the supplied scenario, sketch the system, and list three observations separately from explanations. Label salt water, frozen fresh water, groundwater, and surface fresh water separately. Write a prediction that could be checked and note any safety or material limits. Set up the concrete observation or model protocol printed in the worked example and save the starting record.
- Construct a labeled paper model of the original scenario and a contrasting condition. Label salt water, frozen fresh water, groundwater, and surface fresh water separately. Make an observation table with columns for condition, what changes, expected observation, and possible uncertainty. If an adult approves a safe physical version, keep every original model and record. Follow the printed protocol; enter actual observations or explicitly labeled supplied model data, preserving units and conditions.
- Compare the model conditions in three repeated trials or three carefully traced model runs. Record every result, including unexpected outcomes. Complete the practice questions and revise one model label so it distinguishes observed information from a proposed mechanism. Use the protocol’s repeated records and compare every trial; never invent a measurement to make the pattern cleaner.
- Add a new condition to your own model of the distribution of earth’s water, changing only one important factor where practical. Predict the effect before tracing or testing it. Compare the new record with the original conditions and explain what the comparison can and cannot establish. Revisit the same observation or model on a later day, preserving the original record and marking exactly what changed.
- Create a claim-evidence-reasoning display using your model drawings and all three repeated records. Label salt water, frozen fresh water, groundwater, and surface fresh water separately. State one limitation, one justified revision, and a question for a later investigation; then attempt the reserved independent check without feedback.
Open the printable learning material